Signals and codes · family
Wolf Induction Cooktop: Lights, Beeps and Codes
A Wolf induction top speaks through its control panel: a power level that flashes, a lock symbol, a hot-surface light, a boost that fades. Find the row that matches what you see, then read the verdict beside it.
Wolf Induction Cooktop: Lights, Beeps and Codes: signal, meaning and verdict
- Power level flashing, no heat The zone cannot sense a pan it can heat. Safe to wait Call today when: A magnet grips the pan and it covers the ring
- Zone switches itself off mid-cook A built-in time limit, a pan it lost, or a pan left empty. Safe to wait Call today when: Zone cuts out within minutes, again and again
- Lock light on, no control answers The control panel lock is set. Safe to wait Call today when: Symbol stays lit however long you hold
- Hot-surface light on a cold top Normal while the glass cools; a fault if it never clears. Safe to wait Call today when: No light at all straight after hard cooking
- Locked after the power comes back The cooktop wakes up locked after an outage. Safe to wait Stop using it when: That breaker trips again straight away
- Continuous beep from the controls A finished timer, or something resting on the controls. Safe to wait Call today when: Beeping, and no timer is set
- Bridge will not join two zones Bridge not set in order, or a zone fault. Safe to wait Stop using it when: A griddle already spans two zones
- Boost on, the next zone slows Boost borrows power from the adjacent zone. Safe to wait Call today when: One zone slow, no boost set anywhere
- Fan still running after switch-off The cooling fan finishing its job. Safe to wait Call today when: Still running long after the glass is cold
- Letters or numbers on the display Often a settings menu; a code that returns is a call. Safe to wait Call today when: Any other code, with the panel locked
Which Wolf induction you have
The current Wolf induction cooktops — the CI models in 15, 24, 30 and 36 inch widths — share one control panel and one use and care guide, and this table follows it. The older CT models behave much the same, with two differences: releasing their lock takes a five-second hold rather than three (locking is three seconds on both), and their guide describes codes that clear with a CLEAR pad. The rating plate underneath tells you which is yours.
Two checks before any row
The pan has to be magnetic: a fridge magnet should cling firmly to its base. And the cooktop needs a circuit of its own. Wolf’s installation guide asks for a dedicated circuit and advises against a GFCI breaker, so a top that trips a shared or GFCI circuit is a question for an electrician first.
When your row says call, ring Redmond Wolf Repair on (425) 905-2822 and say which row you landed on.